Saimac 2 Stroke Gasoline Engine 175 2 Blade Tiller
Saimac 2 Stroke Gasoline Engine 175 2 Blade Tiller
Parameters
| NAME | 175 2 BALDE TILLER |
| Type: | BR41141 |
| Engine type: | 4-tempi |
| Displacement: | 141cm³ |
| Rated engine power. | 2.5KW |
| Max.Engine rotation speed: | 3600/min |
| Forward Transmisslon ratio: | 1:35 |
| Volumes of fuel tank: | 1.0L |
| Volumes of lubricating oil tank: | 0.6L |
| Working width: | 400mm |
| Tine rotating diameter. | 260mm |
| Blade thickness: | 3.0mm |
| Net weight(including engine): | 29kg |
| Fuel: | Unleaded gasoline 90# |
| Engine oil: | SAE 10W-30 grade |
| Gear lubricating oi: | API GL-5 or SAE 85W-140 |
| Sound pressure level,Lpa: | 76.3dB(A)K=3dB(A) |
| Sound power level,LWA: | 93dB(A) |
| Vibration emission value(k =1.5 m/s2) | 4.60m/s² |
Features
SHARP AND DURABLE BLADE
High strength manganese steel blade, strong and sharp, fast cutting"
THREE-DIMENSIONAL ENGINE
Gasoline engine three-dimensional cycle heat dissipation, stable performance, more durable, continuous operation without flameout.
ADJUSTABLE ANGLE
The handle angle can be adjusted in four gears to adapt to the use requirements of different heights
ENLARGED GEARBOX
Enlarged variable speed gearbox, fast heat dissipation, wear resistance
Notice
"In order to ensure that you can use this MINI TILLER BR48T correctly and safely, please pay attention to the following matters:
1: Before using the machine, the operator should familiarize himself with the manual, and run-in, adjust and maintain according to the requirements of the manual.
2: The operator must tie his clothes and cuffs tightly and wear protective tools when operating.
3: The parts that affect the safety and operation of the MINI TILLER BR48T should not be modified by themselves. the operator should concentrate on the operation.
4: The MINI TILLER BR48Tcan only be started when it is confirmed that it is safe, and it is not allowed to carry out large-load work immediately after the cold machine is started, especially the new machine or the machine after overhaul.
5: During the operation, pay attention to the working conditions and sound of each part, check whether the connection of each part is normal, no loosening phenomenon is allowed, such as abnormal sound and other abnormal phenomena, should immediately cut off the power, stop for inspection, do not allow the elimination of faults when the machine is running,
6: When removing entanglement and mud, the power should be cut off first, and then removed after the machine is stationary. Do not allow the machine to remove blockages from the blade by hand or iron rod while running"
