Best SAIMAC 2 STROKE GASOLINE ENGINE BRUSH CUTTER CG411 Manufacturer and Supplier

SAIMAC 2 STROKE GASOLINE ENGINE BRUSH CUTTER CG411

Short Description:

This machine BRUSH CUTTER CG411 can be applied to garden lawn, highway, airport weed trimming, power using mixed oil engine, because of the two-stroke technology mature, and high output efficiency, easy to carry, can meet most of your garden requirements, but because of its small production volume, limited the scope of use and usage.

Send email to us

Product Detail

Product Tags

Parameters

MODEL:		CG411
MATCHED ENGINE:		1E40F-6
MAX POWER(kw/r/min):		1.45/6500
DISPLACEMENT(CC):		40.2
MIXED FUEL RATIO:		25:1
FUEL TANK CAPACITY(L):		1
CUTTER WIDTH(mm):		415
BLADE LENGTH(mm):		255/305
DIAMETER OF CYLINDER(mm):		40
NET WEIGHT(kg):		7.2
PACKAGE(mm)	ENGINE:	300300280
	SHAFT:	1650110105
LOADING QTY.(1*20feet)		660

Features

FLEXIBLE TO USE

With a rotatable lever, it can rotate work at multiple angles, cutting weeds more fully and working easier.

STABLE RELIABILITY

Due to the mature technology of two-stroke gasoline engines, its reliability during operation can be fully guaranteed, and the state of operation is quite stable.

EASY TO USE AND MAINTAIN

Because the power adopts 1E36F gasoline engine, wide range of users, the two-stroke technology is mature, and the versatility and interchangeability of parts can be guaranteed.

RUN LONG TIME

Due to the perfect supporting system of gasoline engines, it can run for a long time and generate less heat.

Notice

Because when the BRUSH CUTTER works, the blade rotates rapidly, so pay special attention to the following points when using :
1: Read the included instruction manual carefully before use, especially the content with warnings or warnings in the manual.
2: Once it is determined that the machine is not working normally, please stop and check immediately.
3: Wear necessary protective equipment when working.
4: Improve concentration at work, protect yourself and do not harm others.
5: Check and maintain the machine regularly to ensure that the machine can work normally.