Saimac 2 Stroke Gasoline Engine Hedge Trimmer G23L
Saimac 2 Stroke Gasoline Engine Hedge Trimmer G23L
··················································Parameters··················································
| ODEL: | G23L |
| MATCHED ENGINE: | 1E32FL |
| DISPLACEMENT(cc): | 22.5 |
| MAX.POWER(kw/r/min): | 0.65/7500 |
| FUEL TANK CAPACITY(L): | 0.6 |
| FORM OF CARBURETOR: | DIAPHRAGM |
| MIXED FUEL RATIO: | 25:1 |
| CUTTER WIDTH （mm）: | 600 |
| SCISSORS TYPE(mm): | DUAL BACK AND FORTH |
| NET WEIGHT(kg): | 5.5 |
| PACKAGE(mm) | 1090X245X250 |
| LOADING QTY. (1*20 feet) | 478 |
···········································Features····················································
EASY TO START
Dual-spring lightweight starter with dual-spring recoil design for easier start-up. ”
WORK SMOOTHLY
Widened, thickened, efficient and durable blade, double-sided blade, double trim
Laser cutting blade, wear-resistant, sharp, when used, run more smoothly.
ALLOY CYLINDER
Thickened alloy cylinder, long-term work, not easy to pull the cylinder
QUENCHING GEARS
High temperature quenching, large gear number are closely combined, the transmission power loss is low, the power is increased by more than 30%, and the output is more stable and durable. ”
···········································Notice····················································
“In order to ensure that you can use this MINI TILLER BR48T correctly and safely, please pay attention to the following matters:
1: Before using the machine, the operator should familiarize himself with the manual, and run-in, adjust and maintain according to the requirements of the manual.
2: The operator must tie his clothes and cuffs tightly and wear protective tools when operating.
3: The parts that affect the safety and operation of the MINI TILLER BR48T should not be modified by themselves. the operator should concentrate on the operation.
4: The MINI TILLER BR48Tcan only be started when it is confirmed that it is safe, and it is not allowed to carry out large-load work immediately after the cold machine is started, especially the new machine or the machine after overhaul.
5: During the operation, pay attention to the working conditions and sound of each part, check whether the connection of each part is normal, no loosening phenomenon is allowed, such as abnormal sound and other abnormal phenomena, should immediately cut off the power, stop for inspection, do not allow the elimination of faults when the machine is running,
6: When removing entanglement and mud, the power should be cut off first, and then removed after the machine is stationary. Do not allow the machine to remove blockages from the blade by hand or iron rod while running”
CONTACT ME
Afra Liu
Email: sales2@boruipower.cn
We Chat :+86 176 6293 6831
