Saimac 2 Stroke Gasoline Engine Mini Cultivator Cg328w
Saimac 2 Stroke Gasoline Engine Mini Cultivator Cg328w
Parameters
| MODEL: | CG328W | |
| MATCHED ENGINE: | 1E36F | |
| MAX POWER(kw/r/min）: | 0.81/6000 | |
| DISPLACEMENT(CC): | 30.5 | |
| MIXED FUEL RATIO: | 25:1 | |
| FUEL TANK CAPACITY(L): | 1.2 | |
| CUTTER WIDTH(mm)： | 350 | |
| Reduction ratio： | 33;1 | |
| NET WEIGHT(kg): | 11.8 | |
| PACKAGE(mm) | ENGINE: | 330*230*330 |
| SHAFT: | 1580*110*110 | |
| TILLER: | 360*250*190 | |
| LOADING QTY.(1*20feet) | 460 | |
Features
MADE FOR 1E36F
Specially produced for those who prefer side hangings and 1E36F, it can meet the unique usage requirements of customers.
STABLE RELIABILITY
Although its structure is almost completely opposite to BG328, due to the mature technology of two-stroke gasoline engines, its reliability during operation can be fully guaranteed, and the state of operation is quite stable.
EASY TO USE AND MAINTAIN
Because the power adopts 1E36F gasoline engine, wide range of users, the two-stroke technology is mature, and the versatility and interchangeability of parts can be guaranteed.
FLEXIBLE TO USE
With a rotatable lever, it can rotate work at multiple angles, cutting weeds more fully and working easier.
RUN LONG TIME
Due to the perfect supporting system of gasoline engines, it can run for a long time and generate less heat.
Notice
Because the MINI CULTIVATOR CG328W is powered by a gasoline engine that rotates at high speed, and the micro tiller blade used for weeding, connected by an aluminum tube, is far from the machine.Therefore, in the process of use, you need to pay attention to the following points:
1: Read the product manual carefully before use, it is best to have certain operating experience, or operate this machine accompanied by someone with operating experience
2: In case of emergency, make sure the machine can be shut down quickly
3: Wear protective equipment to avoid possible injuries such as goggles and earplugs
4: Check all parts of the machine before each use to make sure the screws are not loose
5: Clean up weeds or other entanglements on the blade in time
