Best Saimac 2 Stroke Gasoline Engine Mini Tiller DV-63 Manufacturer and Supplier

Saimac 2 Stroke Gasoline Engine Mini Tiller DV-63

Short Description:

“This MINI TILLER DV-63，Due to its small size, high efficiency, easy operation, and wide range of applications, it makes it easier and more efficient for agricultural workers. It can be applied to pastoral loosening, rotary tillage ridge, weeding and turning the ground, ditching and farming, and is common to paddy and dry fields.

Send email to us

Product Detail

Product Tags

Parameters

MODEL	BR48T
Transmit method	centrifugal frictional clutch
Width of rotating plough	450mm
Reduction ratio	50.7
Net weight	30kg
Model	1E48F
Discharging volume	63.3cc
Method of starting	recoil starting
Igniting mode	not pot of touch ignition
Ratio of the mixing oil	mixing rate between 90# gasoline and two-stroke oil is 25:1
Standard power	2.2kw/7500r/min

Features

SHARP AND DURABLE BLADE

High strength manganese steel blade, strong and sharp, fast cutting"

THREE-DIMENSIONAL ENGINE

Gasoline engine three-dimensional cycle heat dissipation, stable performance, more durable, continuous operation without flameout.

ADJUSTABLE ANGLE

The handle angle can be adjusted in four gears to adapt to the use requirements of different heights

ENLARGED GEARBOX

Enlarged variable speed gearbox, fast heat dissipation, wear resistance

Notice

"In order to ensure that you can use this MINI TILLER BR48T correctly and safely, please pay attention to the following matters:
1: Before using the machine, the operator should familiarize himself with the manual, and run-in, adjust and maintain according to the requirements of the manual.
2: The operator must tie his clothes and cuffs tightly and wear protective tools when operating.
3: The parts that affect the safety and operation of the MINI TILLER BR48T should not be modified by themselves. the operator should concentrate on the operation.
4: The MINI TILLER BR48Tcan only be started when it is confirmed that it is safe, and it is not allowed to carry out large-load work immediately after the cold machine is started, especially the new machine or the machine after overhaul.
5: During the operation, pay attention to the working conditions and sound of each part, check whether the connection of each part is normal, no loosening phenomenon is allowed, such as abnormal sound and other abnormal phenomena, should immediately cut off the power, stop for inspection, do not allow the elimination of faults when the machine is running,
6: When removing entanglement and mud, the power should be cut off first, and then removed after the machine is stationary. Do not allow the machine to remove blockages from the blade by hand or iron rod while running"